VIDEO

Informace

Mitshubishi

Mitshubishi P0776

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi P0776

Basic error definition

Abnormality in Secondary Pressure Solenoid Valve Function (CVT)

Cause of DTC

The following three conditions are met for three seconds. Engine speed is 450 r min or more. Power supply voltage is 10 volts or more. -Difference between target secondary pressure and actual secondary pressure is 1.20 MPa (174 psi) or more. TCM conducts fault detection by measuring the difference between the target value and the actual value for the secondary pressure.