VIDEO

Informace

Mitshubishi

Mitshubishi P0302

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi P0302

Basic error definition

Cylinder 2 Misfire Detected

Cause of DTC

Engine speed is between 440 and 6,500 r min. Engine coolant temperature is higher than -10°C (14°F). Barometric pressure is higher than 76 kPa (22.4 in. Hg). Volumetric efficiency is at between 30 and 60 percent. Adaptive learning is complete for the vane which generates a crankshaft position signal, while the engine is running, excluding gear shifting, deceleration and sudden acceleration deceleration. The throttle deviation is -0.06 V 25 ms to +0.06 V 10 ms. Misfire has occurred more frequently than allowed during the last 200 revolutions [when the catalyst temperature is higher than 1,000°C (1,832°F)]. Or. Misfire has occurred in 15 or more of the last 1,000 revolutions (corresponding to 1.5 times the limit of emission standard).