VIDEO

Informace

Mitshubishi

Mitshubishi P1835

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi P1835

Basic error definition

Shift Fork Position Sensor 4 System (Poor performance)

Cause of DTC

Voltage of battery: 8 V or more. Voltage of battery: 16.5 V or less. Engine speed: 650 r min or more. Time since above engine condition: 1.5 seconds or more. Input shaft 2 (even) speed: 500 r min or more. Shift fork 4 current gear: 4th gear. Clutch 2 (even) transmit torque: 40 N·m (30 ft-lb) or more. Requested shift fork: Not shift fork 4. The travel distance of the shift fork 4 remains 6 mm (0.24 inch) or more for 250 millisecond.