VIDEO

Informace

Mitshubishi

Mitshubishi B1448

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi B1448

Basic error definition

BTSI Control - Circuit Short To Ground

Cause of DTC

The Brake Switch signal must be active before the Shift Lever can be moved out of the Park position. When the Brake Pedal is applied, the Body Control Module (BCM) receives a Controller Area Network (CAN) message from the Anti-lock Brake System (ABS) Module. Based on the Gear Selector position, the BCM then provides battery voltage to the Gear Selector to activate the Brake Transmission Shift Interlock (BTSI) solenoid.