VIDEO

Informace

KIA

KIA P0014

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

KIA P0014

Basic error definition

Brake Pedal Input Circuit Failure

Cause of DTC

The ABS module receives the brake pedal position switch signal from the Smart Junction Box (SJB) along the High Speed Controller Area Network (HS-CAN) bus. The ABS module compares the brake pedal position message to the signal from the brake pressure transducer (internal to the ABS module). If the brake pedal position message does not agree with the brake pressure signal, DTC B1483 will set.