VIDEO

Informace

Mitshubishi

Mitshubishi U1073

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi U1073

Basic error definition

Battery Current Sensor 2 Circuit Malfunction (HYBRID MODELS)

Cause of DTC

With the ignition switch ON (ll), one of the following 2 symptoms can occur. Symptom 1: The average value of the battery current sensor input deviates from the range of 2.24 V to 2.67 V. Symptom 2: The absolute current value difference between the ISOC signal and the ISOCF signal is 10 A or more for at least 2 seconds when the battery current sensor value is in the range of -30 A to 30 A. (IMA system indicator is ON) WARNING: The IMA system uses high voltage (144 V), before servicing turn OFF the battery module switch.