VIDEO

Informace

Dodge

Dodge P0418

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Dodge P0418

Basic error definition

Ignition Coil F Primary Secondary Circuit

Cause of DTC

Monitor runs whenever following DTCs are not present: None Either of the following condition A or B is met: A. Engine RPM: 1500 rpm or less B. Starter: OFF Either of the following condition C or D is met: C. Both of the following conditions are met: (a) Engine speed: 500 rpm or less (b) Battery voltage: 6 V or more D. All of the following conditions are met: (a) Engine speed: More than 500 rpm (b) Battery voltage: 10 V or more (c) Number of sparks after CPU reset: 5 sparks or more