VIDEO

Informace

Audi

Audi P1176

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Audi P1176

Basic error definition

O2 Correction Behind Catalyst B1 Limit Attained

Cause of DTC

Engine started, battery voltage must be at least 11.5v, all electrical components must be off, the ground between the engine and the chassis must be well connected, the exhaust system must be properly sealed between the catalytic converter and the cylinder head, the coolant temperature must be at least 80 degrees Celsius, and the oxygen sensor heater for oxygen sensor before the catalytic converter must be properly functioning. The ECM has detected a malfunction of the oxygen sensor. Note: Vacuum in the intake system sucks in the leak detection spray with false air. Leak detection spray decreases ignition quality of the fuel mixture. This causes a drop in engine speed and changes the value produced by the Heated Oxygen Sensor (HO2S). Note: Vehicle must be raised before connector for oxygen sensor is accessible. Note: The oxygen sensor before catalytic converter has a static regulation and can be differentiated from the oxygen sensor behind catalytic converter via a 6-pin connector.