VIDEO

Informace

Cadillac

Cadillac U1026

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Cadillac U1026

Basic error definition

Cylinder 2 Misfire Detected

Cause of DTC

DTCs P0117, and P0118 are not set. The Crankshaft Position Reluctor Wheel Learn procedure has successfully completed. The ECT is warmer than 40°C (104°F). The engine is running at idle for more than 10 s. The engine RPM is between 400-1,300 RPM. The vehicle speed is less than 2 mph. The calculated fuel rate is between 5 mm⊃; and 100 mm⊃; . The fuel level is above 15%. DTCs P0300-P0308 will run once per ignition cycle when the above conditions are met.