VIDEO

Informace

Mitshubishi

Mitshubishi P0507

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi P0507

Basic error definition

Idle Control Sytem RPM Higher Than Expected

Cause of DTC

Under the closed loop idle speed control. Engine coolant temperature is higher than 41°C (105°F). Battery positive voltage is higher than 10 volts. Barometric pressure is higher than 76 kPa (22.4 in. Hg). Intake air temperature is higher than -10°C (14°F). After 3 seconds have elapsed from the start of the previous monitoring. Target throttle actuator control motor position is 0 step. Actual idle speed has continued to be higher than the target idle speed by 200 r min (300 r min) or more for 10 seconds.