VIDEO

Informace

Acura

Acura P0116

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Acura P0116

Basic error definition

Engine Coolant Temperature (ECT) Sensor 1 Circuit Range Performance Problem

Cause of DTC

The execution time is once per driving cycle and the duration time is 10 seconds or more. The folowing DTCs are not active P0101, P0102, P0103, P0107, P0108, P0117, P0118, P0134, P0135, P0154, P0155, P0171, P0172, P0174, P0175, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0335, P0339, P0340, P0344, P0401, P0404, P0443, P0496, P0497, P0506, P0507, P0627, P1077, P1078, P1128, P1129, P1172, P1174, P145C, P2195, P2197, P2227, P2228, P2229, P2237, P2238, P2240, P2241, P2243, P2245, P2247, P2249, P2251, P2252, P2254, P2255, P2413, P2610, P2646, P2647, P2648, P2649. Malfunction determination 1: With a completely cooled engine (one that has been off for at least 6 hours): When the change in coolant temperature after 42 minutes or more of running time or drive 5 miles (7 km) or more of driving time is 50 ºF (10 ºC) or less, a malfunction is detected. Malfunction determination 2: With a partially cooled engine (one that has been off for less than 6 hours): When the difference between the coolant temperature after 42 minutes or more of running time or drive 5 miles (7 km) or more of driving time the coolant temperature after the engine has been off for 150 minutes and then run for 10 seconds is 50ºF (10 ºC) or less, a malfunction is detected. NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot.