VIDEO

Informace

Mitshubishi

Mitshubishi P2729

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Mitshubishi P2729

Basic error definition

Key Codes, Not Programmed

Cause of DTC

The control module checks if there are any key codes stored in the EEPROM memory circuit every time the ignition is switched on. Diagnostic trouble code (DTC) IMM-132 is stored if no key codes are stored. There are two reasons for diagnostic trouble code (DTC) being store:. The key codes have been erased from the EEPROM memory circuit and no other keys have been programmed in. The control module is not initiated. The diagnostic trouble code (DTC) is erased automatically in normal function when the first key code is programmed into the control module memory. The diagnostic trouble code (DTC) is erased when the counter value is one