VIDEO

Informace

Acura

Acura P0735

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Acura P0735

Basic error definition

Problem in 5th Clutch and 5th Clutch Hydraulic Circuit (5th gear incorrect ratio)

Cause of DTC

The Powertrain Control Module (PCM) computes the ratio of the input shaft (mainshaft) speed to the output shaft (countershaft) speed. When the ratio is not the 5th gear ratio, it is detected as a malfunction of the hydraulic circuit or the 5th clutch. The actual gear ratio must match one of these conditions for at least 12 seconds with the 5th gear command. Actual gear ratio is greater than the 5th gear ratio by a factor of 1.2 Actual gear ratio is less than the 5th gear ratio by a factor of 0.75 NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot